
Pidilite Innovation Centre
Testing & Consultancy
1.1 Adhesion by Tape Test
1.2 Brushing and Roller Coating
1.3 Condition in Container
1.4 Heat Resistance
1.5 Rheological Properties of Sealant
1.6 Storage Stability
1.7 Visual Comparison of Colors of Paints
1.8 Washability
1.9 Weathering Resistance
2.1 Colourimetry page
2.2 Drying and Curing Time
2.3 Density
2.4 Extrusion Rate of Sealant
2.5 Fineness of Grind
2.6 Gloss Measurement
2.7 Haze Measurement
2.8 Non-Volatile Content
2.9 Opacity
2.10 Skid and Slip Resistance
2.11 Taber Abrasion
2.12 Viscosity
3.1 Compression and Flexural Strength
3.2 Crack Bridging
3.3 Efflorescence
3.4 Flexibility
3.5 Hardness
3.6 Hydrostatic Pressure
3.7 Impact Resistance
3.8 Peel Strength of Sealant
3.9 Pull-off Strength Test
3.10 Puncture Resistance
3.11 Tear Strength
3.12 Tensile Strength and Elongation
3.13 Water Permeability
3.14 Water Resistance
4.1 Alkaline Resistance (Spotting Method)
4.2 Chemical and Stain Resistance
4.3 Corrosion Resistance
5.1 Automatic Film Applicator
5.2 Coating Thickness Gauge
5.3 Coring Machine
5.4 Lever-controlled Sample Cutter
- + Qualitative Analysis
-
1.1 Adhesion by Tape Test
1.2 Brushing and Roller Coating
1.3 Condition in Container
1.4 Heat Resistance
1.5 Rheological Properties of Sealant
1.6 Storage Stability
1.7 Visual Comparison of Colors of Paints
1.8 Washability
1.9 Weathering Resistance - + Quantitative Analysis
-
2.1 Colourimetry page
2.2 Drying and Curing Time
2.3 Density
2.4 Extrusion Rate of Sealant
2.5 Fineness of Grind
2.6 Gloss Measurement
2.7 Haze Measurement
2.8 Non-Volatile Content
2.9 Opacity
2.10 Skid and Slip Resistance
2.11 Taber Abrasion
2.12 Viscosity - + Physical & Mechanical Performance Analysis
-
3.1 Compression and Flexural Strength
3.2 Crack Bridging
3.3 Efflorescence
3.4 Flexibility
3.5 Hardness
3.6 Hydrostatic Pressure
3.7 Impact Resistance
3.8 Peel Strength of Sealant
3.9 Pull-off Strength Test
3.10 Puncture Resistance
3.11 Tear Strength
3.12 Tensile Strength and Elongation
3.13 Water Permeability
3.14 Water Resistance - + Chemical Analysis
-
4.1 Alkaline Resistance (Spotting Method)
4.2 Chemical and Stain Resistance
4.3 Corrosion Resistance - + Sample Preparation
-
5.1 Automatic Film Applicator
5.2 Coating Thickness Gauge
5.3 Coring Machine
5.4 Lever-controlled Sample Cutter